P. 5-20 – Toa N-8000 Series User Manual
Page 430
Chapter 5
SYSTEM SETTINGS BY SOFTWARE
General: Equipment Registration
5-20
[Screen description]
(1) Starting Equipment Number
Enter the first unit number to be set. Unit numbers of 1 – 192 are automatically assigned in sequential
order starting with the number entered here. However, duplicated numbers cannot be assigned.
(2) Equipment No.
Used to enter the equipment number of the exchange. Set a number (1 – 192) that does not
duplicate other unit numbers.
(3) Equipment name
Allows a name up to eight alphanumeric characters to be entered for the equipment.
(4) Model (Can't be edited.)
Model numbers of equipment are displayed.
(5) Ip Address
Allows an IP address for the equipment to be entered.
(6) Web port
Allows the Web server's port number to be entered.
(7) WAN Ip address
Allows the IP address for the equipment as viewed from the wide-area network (WAN) to be
entered. This space may be left blank if NAPT is not used.
(8) WAN Web port
Allows the Web server's port number for the equipment as viewed from the wide-area network
(WAN) to be entered. This space may be left blank if NAPT is not used.
Step 2. Set the system configuration.
Enter the number of the equipment connected to the network .
The total number is displayed in the "Total number of equipment connected to Network" space, and a
list of equipment (exchanges, various kinds of interface units, and IP stations) is displayed.