Toa N-8000 Series - Manual (Page 91)

1-74
Chapter 1 GENERAL DESCRIPTION
Function Description
Reference page
Operation Setting
Paging
Zone paging Calls can be made to one of the preprogrammed zones. p. 2-143
p. 5-100
p. 5-121
Selectable
paging
Calls can be made to up to 50 zones of the
preprogrammed multiple zones.
p. 2-144
All-call paging
Calls can be made simultaneously to all of the
preprogrammed zones.
p. 2-145
Emergency
paging
Terminates all conversations, paging calls and other
operations that are currently in progress within the
system, allowing announcements to be simultaneously
made to all stations and all units preprogrammed to
receive paging calls.
p. 2-146 p. 5-100
Other
functions
Scan monitor
The ambient audio of multiple preprogrammed stations
can be monitored in preprogrammed sequence from
the station. Designating the stations by the telephone
operation also permits them to be monitored in
designated sequence.
p. 2-148 p. 5-101
Door remote
control
Electronic locks or other external devices can be
controlled through utilization of the Door Station's
contact output.
If a telephone engaged in conversation with a Door
Station activates the Remote Door Control function,
the Door Station's contact output closes for a specified
period of time. Similarly, the contact output of the
Multi-Interface Unit, the Direct Select Unit, and the
Audio Interface Unit can also be controlled.
p. 2-153
p. 5-35
p. 5-37
p. 5-62
p. 5-64
p. 5-66
p. 5-80
p. 5-97
p. 5-100
External
equipment
control
Through operation of the telephone, external
equipment can be controlled by transmitting a one-
shot make output signal or make/break contact signal
to the contact of the designated Multi-Interface, Direct
Select unit, or Audio Interface unit, or by transmitting
a one-shot make output signal to the contact of the
designated door station.
p. 2-150
p. 5-35
p. 5-43
p. 5-49
p. 5-62
p. 5-100
p. 5-106
p. 5-110
p. 5-114
p. 5-117
IP door station's
speaker output
switching control
(only when the
N-8640DS/
8650DS is used)
The audio output destination of the N-8640DS/8650DS
IP door station engaged in conversations with the
telephone can be switched to either the internal
speaker or the speaker connected to the external
speaker terminal by the telephone's dial operation.
The switched audio output destination reverts to the
internal speaker when the conversations terminate or
when the condition changes.
p. 2-155 p. 5-66
Access code
authentication
Usage of the telephone can be restricted when the access
code authentication (4-digit password) is enabled.
If authentication fails, such operations as calling,
scan monitor, and paging calls cannot be made. Call
response and emergency operations are not subject to
access code authentication.
p. 2-156 p. 5-100