Toa N-8000 Series - Manual (Page 438)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
General: Gateway Settings
5-28
5.3.6. Gateway Settings
Perform settings necessary for making broadcasts to the SX-2000 system.
Prepare the SX-2000 Setting file in advance.
Step 1. Click the “Gateway Settings” tab.
The setting screen below is displayed.
Step 2. Select the SX-2000 System to be connected.
Mark the [Enable] checkbox for the SX-2000 System to be connected.
The [Detailed setting] button becomes active.
Up to 8 systems can be connected.
Note: A number (1 through 8) above the checkbox is the ID of SX-2000 system.
Step 3. Read the SX-2000 System settings.
3-1. Click the [Detailed setting] button.
The SX-2000 Setting dialog is
displayed.
3-2. Click the [Browse] button to
select the SX-2000 Setting file.
3
-1
3
-2