Toa N-8000 Series - Manual (Page 258)

2-147
Chapter 2 FUNCTIONS AND OPERATION
N-8000AL TELEPHONE INTERFACE CONNECTED TELEPHONE
3.1.5. Paging priority
[Emergency paging]
Emergency paging takes precedence over conversations, paging calls and all other functions. Initiating
Emergency paging terminates all other functions currently in operation, and these functions are not restored
even when the page is completed. Further, all other functions are disabled until the Emergency paging is
completed.
[All-call paging, zone paging and selectable paging priorities]
The all-call paging has the highest priority, while the zone paging and selectable paging are the same in priority
level.
• Initiating the all-call paging during the zone or selectable paging terminates the zone or selectable paging,
allowing the all-call paging to go through.
• Initiating another paging of the same priority during a paging causes the later paging to be held busy when
the paged station or in-use PA paging output overlaps.
[All paging function priorities]
Priorities are assigned in the following order.
• Emergency paging
• Message paging (Refer to p. 2-76 .)
• External input broadcast (when priority is enabled) (Refer to p. 2-181 .)
• All-call paging
• Zone paging and selectable paging
Note
For more information, read "Priorities" on p. 2-177 .
3.2. Receiving Paging Calls (only Emergency pagings can be received)
If a telephone connected to the N-8000AL Telephone Interface Unit receives an Emergency paging call, the call
bell of that telephone rings.
The call bell is different from a normal call tone. (Refer to the List of Signal Tones on p. 2-193 to confirm.)
Lift the telephone handset to hear the paging content with the handset.