Toa N-8000 Series - Manual (Page 218)

2-107
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
Step 3. Speak into the microphone when the microphone indicator of the Talk key begins to light green.
Tip
When a part of the zones being broadcast to is assigned to the SX-2000 zone selection key other than
the key pressed in Step 1, the status indicator of so assigned zone selection key flashes green.
Note
In the example shown at right, the
status indicator of the uppermost
SX-2000 zone selection key flashes
green as a part (Zone 1) of the set
zone group (Zone pattern 01) is
placed in broadcast mode.
Step 4. Press the Talk key. (Broadcast end)
The chime tone will be broadcast.
In this event, the chime tone is heard through the station's built-
in speaker.
Talk key
Zone 1
Speaker
Zone 8
Speaker
Amplifier
Amplifier
SX-2000 zone selection key
(Zone 1)
SX-2000 zone selection key
(Zone pattern 01*)
SX-2000 zone selection key
(Zone 8 and Zone pattern 02*)
Green Orange
Orange Green
Broadcast status indicator
Microphone indicator
Talk key
Flashes green.
* Zone pattern 01: Zones 1, 2, and 3
Zone pattern 02: Zones 4 and 5