Toa N-8000 Series - Manual (Page 252)

2-141
Chapter 2 FUNCTIONS AND OPERATION
N-8000AL TELEPHONE INTERFACE CONNECTED TELEPHONE
+ + +
+ + +
4 3 X X (Confirmation tone)
Function designated
number
Transfer destination
station number
4 3 Y Y (Confirmation tone)
The originally called (your)
telephone number
Function designated
number
[Calls to stations set for Time-based Call forwarding]
Step 1. When the preset transfer time is reached, the telephone enters the Time-based Call forwarding mode.
Step 2. Calls to stations (original telephone) are automatically transferred to the transfer destination station
without sounding a call tone.
No. 61 6 2
No. 62
Original telephone number
Transfer destination station
Call tone
No. 63
0:00
12:00
6:00
8:00
18:00
16:00
Transfer time
zone
End time Start time
Programming or erasure can be performed at your station.
[Programming]
[Erasure]
Notes
• The telephone to which a call is to be transferred via multi interface unit or C/O line interface unit
cannot be programmed as a transfer destination station.
• The programmed contents set by dialing operation are automatically saved into the C/O line interface
unit at midnight every day. If the C/O line interface unit is turned off before completion of save, the state
returns to the contents that were programmed before power-off.