Toa N-8000 Series - Manual (Page 219)

2-108
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
[When the Talk key is set to "PTT"]
Step 1. Press the SX-2000 zone selection key. (Zone selection)
Multiple zones and zone patterns can also be selected in
combination by pressing 2 or more keys in sequence.
The selection indicator of the selected key lights green.
Tips
• When the status indicator is flashing green, broadcast
is being made by other equipment to a part or all of the
zones set to the SX-2000 zone selection key.
• To clear selection, press the SX-2000 zone selection key
again.
• To clear selection of all zones simultaneously, press the
All zone clear key.
Step 2. Hold down the Talk key. (Broadcast start)
The chime tone will be broadcast.
In this event, the chime tone is heard through the station's built-in speaker.
The microphone indicator of the Talk key flashes green while the chime tone is being sounded.
Note
The chime tone can be set to "None." Use the supplied N-8000 Setting Software to perform chime tone
setting. (Refer to p. 5-72 .)
Green
Status indicator
(Example)
Selection indicator
SX-2000 zone
selection key
(Zone 1)
SX-2000 zone
selection key
(Zone 8 and
Zone pattern 02)
Green Orange
Orange
Broadcast status indicator
Microphone indicator
Flashes
green
Talk key
SX-2000 zone
selection key
(Zone 1)
SX-2000 zone
selection key
(Zone 8 and
Zone pattern 02)