Toa N-8000 Series - Manual (Page 93)

1-76
Chapter 1 GENERAL DESCRIPTION
7.2. Other Functions
Function Description
Reference page
Operation Setting
Priority
Response Priority:
When the system's call response mode is set to
"Selective Response" and a station simultaneously
receives multiple calls, priorities can be assigned to
calls to be responded to.
Call Priority:
Priorities can be assigned to calls. If a higher priority
station or paging call is made to a station currently
in use, that station's conversation or other current
operation is forcibly interrupted.
p. 2-177
p. 5-36
p. 5-44
p. 5-63
Time-out
This function terminates or cancels a call if the user
forgets to do so.
Limits can be set for calling time, conversation time
and paging time.
p. 2-178
p. 5-36,
p. 5-43
p. 5-54
p. 5-63
p. 5-90
p. 5-98
Recording
Setting the Audio Interface Unit's operation mode
to Conversation Recording allows the recording of
conversations, conferences, paging calls and scan
monitoring of the Master Stations and telephones
(used instead of stations). It is also possible to record
conversations of the outside line telephones. Such
conversations and conferences are recorded on
recorders connected to the Audio Interface Unit.
p. 2-178
p. 5-66
p. 5-81
p. 5-89
p. 5-100
p. 5-106
Group blocking
By preprogramming groups of stations that can only
call restricted stations, operations for making calls or
paging between groups can be restricted.
p. 2-179 p. 5-123
Paging delay output
This function controls the audio output according to
the connected external equipment's activation time.
Delay time can be inserted into the time duration
from paging completion to paging pre-announcement
tone output (or paging commencement). The contact
that provides output in synchronization with paging
activation closes upon paging completion, irrespective
of the delay time setting.
p. 2-180
p. 5-36
p. 5-44
p. 5-55
p. 5-63
p. 5-91
p. 5-98
p. 5-107
Paging pre-announcement
tone output control
Paging can be initiated without using a paging pre-
announcement tone. Use of the pre-announcement
tone is selectable.
p. 2-180
p. 5-36
p. 5-55
p. 5-63
p. 5-91
p. 5-98
External input paging
Activating the control input after connecting the
Remote microphone or playback components to the
N-8000MI/8000AF enables broadcasting to the
preprogrammed zone(s).
p. 2-181 p. 5-45
p. 5-106
Paging sync contact output
control
The contact output of both the N-8000MI and
N-8000AF interface units can be set as the paging
output destination. This makes it possible to control
connected external equipment in synchronization with
paging activation.
p. 2-182 p. 5-122
Calling station indication/
CCTV interlock
Closing the Multi interface unit's, the Direct select unit's,
or the Audio interface unit's contact in synchronization
with calls received enables calling station indication or
CCTV system control.
p. 2-183
p. 2-184
p. 5-37
p. 5-55
p. 5-57
p. 5-64
p. 5-66
p. 5-81
p. 5-89
p. 5-98
p. 5-100