Toa N-8000 Series - Manual (Page 588)

6-41
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
10.4. Updating firmware
Note
Updating the firmware may erase the set data (the settings reverts to the factory default settings) depending on
the updated contents.
Before update, be sure to save the current setting file to the PC first.
After update completion, perform network settings, and change the system name and password, then upload
the stored setting file using the N-8000 Software program. Review the settings and correct them if changed.
Step 1. Press "Browse..." button to display "Choose file" dialog.
Step 2. Select the firmware (extension bin), then press "Open" button.
Use the latest version of firmware, which is released on the following our web site.
Tips
• Download the latest version of firmware from our products data site
http://www.toa-products.com/international/.
• The current firmware version can be confirmed on the browser's system management screen.
Step 3. Press "Firmware update" button to start firmware updating.
Note
The status indicator located on the exchange, interface unit or IP station remains lit during update.
Do not switch off or restart the power or remove the LAN cable.