Toa N-8000 Series - Manual (Page 589)

6-42
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
10.5. Clock Settings
If there is a time difference between the exchange, interface unit or IP station system connected to the system,
each exchange's time can be adjusted individually. When the red indication "Clock not set." is displayed in the
"Clock setting" box, this indicates that the clock has never been set in the past or the power has long been
turned off. In such cases, perform clock settings.
Clock adjustment using the Clock Retrieve button
The date and time of the exchange, interface unit or IP station can be adjusted to those of the PC.
Step 1. Press "Clock retrieve" button.
Step 2. Press "Setting" button.
Clock adjustment using a pC
Permits the time to be entered. It is impossible to change the date with this method.
Step 1. Move the cursor to the "hours" and "minutes" cells and enter the time in 24-hour formats.
Step 2. Press "Setting" button.