Toa N-8000 Series - Manual (Page 460)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
Sub-station Interface: Network Settings
5-50
5.6. Setting Sub-station Interface
Click "Sub-station Interface" tab to select the Sub-station Interface to be set.
Choose the name or number of the Sub-station Interface unit from the list.
5.6.1. Network settings
Step 1. Click "Network Settings" tab to display the following setting screen.
Step 2. Set individual items.
(1) Ip address
Allows entry of the Sub-station Interface unit's IP address.
(2) Subnet mask
Allows entry of the Subnet mask.
(3) Default gateway
Allows entry of the Default gateway.