Toa N-8000 Series - Manual (Page 238)

2-127
Chapter 2 FUNCTIONS AND OPERATION
SUBSTATION/SWITCH PANEL'S FUNCTIONS AND OPERATION
Step 1. Press the call button twice or more in rapid succession (under 400 ms
interval).
If a Master Station is called, the Emergency Call tone is sounded.
If a Multi-Functional Master Station is called, the Emergency Call indication
is displayed and the Emergency Call tone sounded.
Note
Call time limits are not applicable to the Emergency Call.
Step 2. Begin the conversation if the called station responds. (Emergency Conversation)
The conversation can continue until terminated by the called master station or telephone.
Note
Call time limits are not applicable to the Emergency Conversation.
Conversation is terminated if the called party replaces the handset or presses the Clear key.
Note
The substations cannot terminate conversations except when handset conversations are made using
the RS-140/142/143/144 in combination with the RS-141 or using the RS-442/480 in combination with
the RS-481.
Notes
• Preprogram the master station or the telephone to call to.
Programming can be performed by dialing operation of the multifunctional master station (refer to p. 7-10 ) or
using the supplied N-8000 Setting Software (refer to p. 5-56 ).
• Use the N-8000 Setting Software to set the call priority order. (Refer to p. 5-56 .)
Flashes
2.2. Using the Call Button with a Lower Priority
The call button assigned a lower priority can also initiate the emergency calls through the operation described
below.
Notes
• The RS-140/180/480 is not capable of initiating Emergency Calls through the operation described below, but
can initiate Emergency Calls by changing the call priority order settings.
• The RS-144's call button can initiate the emergency calls through the operation described below.