Toa N-8000 Series - Manual (Page 284)

2-173
Chapter 2 FUNCTIONS AND OPERATION
OPERATION FROM AN OUTSIDE LINE
3.3. External Equipment Control
(only when the N-8000MI/8000DI/8000AF/8050DS/8540DS/8640DS/8650DS is used)
If the N-8000CO C/O Line Interface Unit is set to allow external equipment control operation, the outside line
telephone can control external equipment by making the designated Multi-Interface unit, Direct Select unit, or
Audio Interface unit provide one-shot make contact or make/break contact at its contact output, or by making
the designated door station provide one-shot make contact at its contact output.
For example, remote door lock control can be performed using the one-shot make output, and indication boards
can be controlled using the make/break output.
It is also possible to set the outside line control password used when operating from the outside line telephone.
Notes
• Use the supplied N-8000 Setting Software to set the one-shot make duration, operation number digits,
operation numbers, the stations allowed to control external equipment, and the outside line control password.
(Refer to p. 5-27, 5-35, 5-43, 5-49 , 5-62 , 5-89, 5-106, 5-110, 5-114 , 5-117 .)
• When performing external equipment control, be sure to complete dialing of all keys within 30 seconds,
otherwise the ongoing dialing operation will be forcibly disconnected from the line.
Data receiving device Door lock control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[Door remote control example using one-shot make output control]
[Hospital waiting status indication board example using the make/break output]
Function designation number
Contact access No.
(2 – 4 digits)
+ + + + + 3 0 Z Z
N-8000CO's
outside line number
(Dial
confirmation tone)
X X + + Y Y Y Y
Outside line
control password
[One-shot make output operation]
First dial the N-8000CO interface's outside line number and confirm that a dial confirmation tone is heard, and
then dial [ ][3][0]+[4-digit outside line control password*]+[access number for the contact corresponding to
external equipment to be controlled].
* The outside line control password is required only when it has been set.