Toa N-8000 Series - Manual (Page 311)

3-7
Chapter 3 INSTALLATION & WIRING
YC-850 Wall mounting bracket
Machine screw M3 x 6
(supplied with the YC-850)
N-8000RS/8010RS/8400RS
2.3. Wall Mounting
Step 1. Install the optional YC-850 Wall mounting bracket to the N-8000RS/8010RS/8400RS.
Step 2. Mount the N-8000RS/8010RS/8400RS on the wall.
Notes
• Use appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the YC-850.
• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be
easily accessible.
Cable clip
Power supply cord
Wood screw 3.5 x 20
(supplied with the YC-850)
Protect against disconnection (Power supply plug)
Unlock cable clip and run the power supply cord
through cable clip.
Note
Keep overall cable length between a power
supply plug and cable clip as short as possible.
Wall surface