Toa N-8000 Series - Manual (Page 138)

2-27
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
3.1.3. Selectable paging to individual zones or the zones set by a zone pattern (N-8600MS only)
Broadcasts can be made to the preset multiple zones (individual zones or a zone group set as a zone pattern*).
* A pattern into which multiple paging zones are grouped.
Note
Set the paging zone and zone pattern using the supplied N-8000 Setting Software. (Refer to p. 5-121, 5-77 .)
Step 1. Press the Paging key.
Step 2. Select a zone.
Multiple zones or zone patterns can be sequentially selected by repeating the key operation in the
following step 2-1 or 2-2.
Note
The maximum number of digits for zone selection dial is 380.
2-1. When selecting a zone
Press the [ ] key, followed by the desired paging zone number (1 − 192).
Note
Enter the zone number with the digit length set by the N-8000 Setting Software.
2-2. When selecting a zone pattern
First press the [ ] key and then Function key, followed by the desired paging zone pattern number
(001 − 216).
Step 3. Press the [ ] key.
A paging tone is transmitted to the selected zone(s).
Step 4. Page with the handset either lifted or in place.
Tip
When the Call response mode is set to "Zone number designation response" (refer to p. 2-32 ), inform
the zone number (only one of the paged zones) to respond to at a paging call.
Step 5. Either press the Clear key or replace the handset.
Paging is completed.
[Example paging to the zone 53 and zone pattern 01
(zones 1, 2, and 3)]
No. 1000 No. 1002 No. 1003 No. 1004
No. 2000 Amplifier
Speaker
1 – 3
0 5 3
0 0 1
(Zone number with 3-digit length)
Zone 1
Zone 2
Zone 3
Zone 53
Zone 1
Zone 2
Zone 3
Zone 53