P. 2-12 – Toa N-8000 Series User Manual
Page 123
2-12
Chapter 2
FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
2.3.2. One-touch dialing
Programming the dial operation (up to 32-digit numbers) into
the station's [7], [8], [9], [0] or off-hook* key allows calls or
other operation to be made by one-touch dialing.
* The action to lift up the handset.
Notes
• Perform one-touch dial programming when using the
external dial input terminal on the N-8031MS/8033MS.
• The one-touch programming can be performed either by dialing operation (see below) or using the supplied
N-8000 Setting Software. (Refer to
.)
Call
No. 200
8
6
X
Y
Y
PTT
+
+
+
+
(Confirmation tone)
Function
designation No.
Dial to be programmed
(up to 32 digits)
One-touch
dialing key
6
X
PTT
+
+
+
(Confirmation tone)
6
7
4
+
+
+
+
1
+
PTT
+
Function
designation No.
Dial to be programmed
(Example) Function designation number of Call forwarding
One-touch
dialing key
6
PTT
1
3
PTT
+
+
+
2
+
+
+
Function
designation No.
Dial to be programmed
One-touch
dialing key
6
PTT
PTT
+
+
+
Function
designation No.
One-touch
dialing key
[Programming]
[Erasure]
Tips
• The key X above represents the [7], [8], [9], [0], or Push-to-talk key, which is used for one-touch
functions.
• Enter one-touch dialing programming (the key Y above) using the Dial keys (12 keys), Paging key,
Paging response key, Hold key, and/or Function key.
[Example] Programming [7] key for function designation number of Call forwarding.
• Press the Push-to-talk key when enabling the Off-Hook function for one-touch key operation.
[Example] Programming and erasing of station [1][2][3] for the Off-Hook function.
[Programming]
[Erasure]
Note
The programmed contents set by dialing operation are automatically saved into the exchange or IP
stations at midnight every day. If the exchange or IP station is turned off before completion of save, the
state returns to the contents that were programmed before power-off.