Toa N-8000 Series - Manual (Page 149)

2-38
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
X X 4 B B B
SX-2000 system
ID number (01 – 08)
Control pattern number* 2
(001 – 162)
4.4.2. Deactivating the control output
Step 1. Press the Function key.
Step 2. Select a control pattern set for the control output pattern.
Press the following keys in order.
Multiple control patterns* 1 can be sequentially selected by repeating key operation shown below.
* 1 Perform control pattern settings using the N-8000 Setting Software. You can also import the control
output pattern of the SX-2000 system, or designate the control output terminal number of the SX-
2000 system. (Refer to p. 5-77 .)
Note
The maximum number of digits for control output selection dial is 380.
Step 3. Press the [ ] key.
The control output(s) are deactivated.
Note
Set the SX-2000 system ID using the supplied N-8000 Setting Software. (Refer to p. 5-28 .)
* 2 The pattern number having been set using the N-8000 Setting Software.