P. 5-57 – Toa N-8000 Series User Manual

Page 467

Advertising
background image

Chapter 5

SYSTEM SETTINGS BY SOFTWARE

Sub-station Interface: Sub-station Settings

5-57

Priority call (Selective response mode only): Set the priority level from 1 to 5 to be assigned to each

station’s "Call 1," "Call 2," or "Call 3" button. Priority level 1 is

the lowest, and Priority level 5 is the same as the priority for

the Emergency call button. The default level is 5 only for the

RS-144’s Emergency call button and 1 for all other buttons.

Notes

• The stations’ call buttons corresponding to "Call 1," "Call 2," or "Call 3" serve as function buttons as listed

below.

• "Call 2" can be set only when the RS-142, RS-144, or RS-442 is connected.

• "Call 3" can be set only when the RS-442 is connected.

Calling station indication/CCTV control

Control output:

Set the Multi interface unit's, Direct select unit's, or Audio interface

unit’s unit number and contact output terminal number, which provide

a make signal when the station is called.

Called party's station No.:

Provides a make contact when the station to be set here is called. Up

to 8 stations can be set.

Level (N-8000RS/8010RS only)

Microphone sensitivity:

Substation hands-free microphone sensitivity can be adjusted in

three increments from 1 (minimum) to 3 (maximum).

The default sensitivity is Level 2.

Speaker output:

Substation's speaker output level can be adjusted in five increments

from 1 (minimum) to 5 (maximum).

The default sensitivity is Level 3.

Call Activation - push 3 times (Sequential response mode, RS-150/160/170/450/460/470/480/442 only):

Sets whether or not to make a call by the operation of pressing the

Call button 3 times within 3 seconds.

With call tone:

Call with a call tone or without a call tone can be set.

Refusal of priority call operation:

Enables the substation to refuse priority calls from others stations.

(Sequential response mode only)

Access to emergency call operation: Sets whether or not to allow the substation to make an emergency call.

(Selective response mode only)

RS-150/160/170/180

/450/460/470/480

RS-140

RS-142

RS-143

RS-144

RS-442

Call 1

Call button

Call button

(CALL)

Call button 1 Call button

(CALL)

Emergency call button

(EMERGENCY)

Call button 1

Call 2

Call button 2

Call button 2 (NORMAL) Call button 2

Call 3

Call button 3

Advertising