Toa N-8000 Series - Manual (Page 550)

6-3
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
3. DISplaYING THE MENU SCREEN
Note
Perform the PC's network setting in advance to allow the PC to communicate with all exchanges, various kinds
of interface units and IP stations in the system.
The user authentication screen will not be displayed unless the PC's network setting completed.
Step 1. Start the browser and enter the URL.
• All exchanges, various kinds of interface units or IP stations in the system are shipped from the
factory with the IP address set to "192.168.1.1" and the Web server port number set to "80." When the
Web server port number is "80," the port number description after the colon (:) can be omitted.
The user authentication screen appears.
Notes
• The screen below is an example for the N-8000EX.
• This screen will look slightly different depending on the browser being used.
Step 2. Enter the user name (case-sensitive) and the password, then press the "OK" button.
Enter the user name programmed to the exchange, interface unit or IP station.
The system name is factory-preset to "N-8000" and the password to "guest." Refer to p. 6-39 for
information on how to change the system name and password.
URL Example
http://IP address:Web server port number/index-e.htm http://192.168.1.1/index-e.htm