Toa N-8000 Series User Manual
Page 56
1-39
Chapter 1
GENERAL DESCRIPTION
11. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to
.) Also, pressing this
key during a hands-free conversation establishes
a one-way conversation from the party who
pressed the key. (Refer to
.)
12. Dial keys
Use these keys to make a call or set a function.
13. Clear key [C]
Terminates the conversation.
14. Arrow keys [ ][ ][ ][ ]
Use these keys to perform auto-dial registration
(refer to
) or system settings (refer to
).
15. Paging key [CALL]
Makes a paging. (Refer to
16. Paging response key [RESP.]
Responds to a paging.
(Refer to
17. Hold key [HOLD]
Places the conversation on hold.
(Refer to
18. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to
LAN
HEAD SET
DC INPUT EXT SP
MIC
SP
12V 200mA
19 20 21 22 23
24
25
19. AC adapter terminal [DC INPuT]
Connect the AC adapter* to this terminal.
*
Use the AD-1210P/1215P (optional) or its
equivalent.
20. External speaker terminal [EXT SP]
An external speaker (8 Ω, 0.6 W) can be connected
to this terminal. (Refer to
Shift the Speaker selector switch (27) located
on the bottom surface of the unit to the EXT.SP
position when using the external speaker.
21. Headset speaker terminal [HEAD SET SP]
Connects to a headset speaker.
When connected, the built-in station speaker is
disabled.
22. Headset microphone [HEAD SET mIC]
Connects to a headset microphone.
23. Network connection terminal [LAN]
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Connecting the station to a PoE (Power over
Ethernet) switching hub eliminates the need for
an AC adapter.
(Ethernet RJ-45 jack)
24. LNK/ACT indicator (green)
Lights when the station is connected to a network
and flashes while transmitting or receiving data.
25. FD indicator (yellow)
Lights when the network is in full duplex
communications.
[Rear]