Toa N-8000 Series - Manual (Page 647)

8-47
Chapter 8 APPENDIX
5.44. YC-290 wall Mounting Bracket
Note: The design and specifications are subject to change without notice for improvement.
Wood screw 3.5 x 20 ............................................. 2
Rubber foot ............................................................ 4
• Accessories
N-8011MS
• Applicable model
5.45. YC-850 wall Mounting Bracket
Note: The design and specifications are subject to change without notice for improvement.
Machine screw M3 x 6 ........................................... 4
Wood screw 3.5 x 20 ............................................. 4
• Accessories
N-8000RS/8010RS/8400RS/8000DI/8000AF/8000CO/8000AL
Note: The YC-850 cannot be used with the N-8000EX, N-8010EX, or N-8000MI.
• Applicable models
Finish Surface treated steel sheet, gray, paint
Dimensions 64 (w) x 131.5 (h) x 31.8 (d) mm
Weight 100 g
Finish Surface-treated steel plate, black, 30 % gloss
Dimensions 45.1 (w) x 220 (h) x 10 (d) mm
Weight 180 g
5.43. YC-280 wall Mounting Bracket
Note: The design and specifications are subject to change without notice for improvement.
Wood screw 3.5 x 20 ............................................. 2
Rubber foot ............................................................ 4
• Accessories
N-8000MS/8010MS/8020MS/8410MS/8500MS/8510MS/8600MS
• Applicable models
Finish Surface-treated steel plate, gray, paint
Dimensions 100 (w) x 140 (h) x 31.8 (d) mm
Weight 120 g