Toa N-8000 Series - Manual (Page 394)

4-6
Chapter 4 SYSTEM DESIGN FLOW
5.2. Exchange
Side TAB Item Default
Reference
page
Network settings IP address * 1, 2, 3 192.168.1.1
SW: p. 5-30
BP: p. 6-5
ST: p. 7-8
Subnet Mask * 1, 2, 3 255.255.255.0
Default Gateway * 1, 2, 3 0.0.0.0
Web server port number * 1, 2 80 SW: p. 5-31
BR: p. 6-5
TCP start port number 5000
p. 5-31
UDP start port number 5006
Multicast port number 6000
NAPT compatible Incompatible
Network ID 1
p. 5-32
WAN IP address 192.168.1.1
WAN Web server port number 80
WAN TCP start port number 5000
WAN UDP start port number 5006
Broadcast specification High quality sound
transmission mode p. 5-33
Communication capacity 2990 kbps
Sampling frequency
correction
Sampling frequency correction Automatic
p. 5-34
Transmitted party IP address
-
Transmitted party port number
-
Recipient party IP address
-
Reception multicast ON/OFF
-
Reception multicast address
-
Function settings Call forwarding function OFF
p. 5-35
Time-based call forwarding function OFF
Time-based call forwarding start time 0:00
Time-based call forwarding end time 0:00
Group hunting function OFF
Absence transfer function OFF
Absence transfer call duration 10 seconds
Oneshot make time 1 second
Call time-out No limit
p. 5-36
Conversation time-out No limit
Paging time-out No limit
BGM input
-
Time-based audio trigger OFF
Start time 0:00
End time 0:00
• All of the above items can be set on the N-8000 Setting Software.
* 1 Be sure to set this since settings and conversations are performed via a network.
* 2 Settings possible from a browser as well.
* 3 Settings possible from a station as well only when it is the N-8000MS Multifunctional master station.