Toa N-8000 Series - Manual (Page 53)

1-36
Chapter 1 GENERAL DESCRIPTION
LAN CONTACT IN
C H
14 15 16
17 18
14. AC adapter terminal [DC INPuT]
Connect the AC adapter* to this terminal.
*
Use the AD-1210P/1215P (optional) or its
equivalent.
15. message start terminal [CONTACT INPuT]
The message is broadcast by connecting this
terminal to external equipment (such as a switch
or a sensor) and closing this terminal by means of
a make contact signal.
16. Network connection terminal [LAN]
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Connecting the station to a PoE (Power over
Ethernet) switching hub eliminates the need for
an AC adapter.
(Ethernet RJ-45 jack)
17. ACT indicator (green)
Lights while transmitting or receiving data.
18. FD indicator (yellow)
Lights when the network is in full duplex
communications.
[Rear]