Toa N-8000 Series - Manual (Page 211)

2-100
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
4.6. One-touch dialing
Programming the dial operation* (up to 32-digit numbers) into the station's [7], [8], [9], or [0] key allows paging
or other operation to be performed by one-touch dialing.
* [0] − [9] keys, key, key, Paging key, Paging response key, Hold key, Transfer key, and Function key.
(Example)
Note
The one-touch programming can be performed by using the supplied N-8000 Setting Software.
(Refer to p. 5-68 .)
Zone 1 (N-8000)
Amplifier
Speaker
No. 1000 No. 1002 No. 1003 No. 1004
Zone 23 (N-8000)
[8] key
Selection indicator
Green
For example, when the dial operation of
[Paging call] [ ] [0] [0] [1] [ ] [0] [2] [3]
[ ] is preprogrammed into the dial 8, such
programmed paging call can be made to the
Zones 1 and 23 by pressing only the key
assigned to dial 8. (When the assigned zone
number is 3-digit long)
4.7. Dial Pattern Activation
4.7.1. Using a dial pattern
When dial operations (up to 380-digit numbers) have been preprogrammed as a dial pattern, assigning the dial
pattern key number to the dial pattern key allows paging or other operation to be performed by one-touch dialing.
Press the Dial pattern key.
(Example)
Dial pattern 1 key
Green
Selection indicator
Zone 1 (N-8000)
Amplifier
Speaker
Zone 1 (SX-2000)
Control output activation
Speaker
Amplifier
For example, when the operation of
combined activation (see p. 2-41 ) has been
preprogrammed into the Dial pattern 1, pressing
only the Dial pattern 1 key allows N-8000 Paging
call, SX-2000 selected zone broadcast, and
control output pattern activation to be performed
at the same time.
Notes
• Program a dial pattern using the Dial keys (12 keys), Paging key, Paging response key, Hold key, Transfer key,
and/or Function key.
• The dial pattern programming can be performed by using the supplied N-8000 Setting Software.
(Refer to p. 5-77 .)
4.7.2. Using dial keys
When dial keys are assigned to the Function keys, a dial pattern can be activated through the same dial
operation as that for dial pattern activation from the N-8600MS Master station.