Toa N-8000 Series - Manual (Page 487)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
IP Station: Pattern
5-77
5.7.7. pattern setting (N-8600MS and Ip Remote microphone only)
Each pattern of the "Zone," "Control" and "Dial" can be registered.
Step 1. Click "Pattern" tab.
The setting screen is displayed.
Step 2. Select the Pattern type.
It can be selected from "Zone," "Control" or "Dial" on the pull-down menu.
Step 3. Press the [Edit] button, then set the details of the pattern selected in Step 2.
A detailed setting dialog corresponding to the selected pattern type is displayed.
[Detailed settings for the pattern]
(1) Zone pattern
Zone pattern can be registered by selecting either "Import" or
"User setting."
• When importing from the SX-2000 system's setting data
Select "Import," then select ID of SX-2000 and Pattern name
from the pull-down menu.
The ID of SX-2000 is that of the SX-2000 system having been
set to the SX-200IP Smart matrix IP module in the Gateway
setting ( p. 5-28 ).
• When setting the new zone pattern (SX)
Select "User setting," then mark the checkbox(es) of the zone(s)
to be registered.
[AO1] − [AO32] represent the SX-2000AO Audio output unit.
[All] and [1] through [8] represent the audio output terminal
numbers.
1
3
2