Toa N-8000 Series - Manual (Page 196)

2-85
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
Function Item Operation Remarks
3-party
conference
2-party conversation Dial [Function] [5] [1] [second party station No.]. Conference-Originating
Station Operation 3-party conversation Dial [Transfer] [third party station No.].
Switching from 2-party
conversation to
3-party conference
Dial [Transfer] [Function] [5] [1] [third party station No.] during
a conversation.
Switching from 3-party
conference to 2-party
conversation
Dial [Transfer] [conference ending station No.].
End of conference Either press the [C] key or replace the handset.
Broadcast to
SX-2000 system
or other activation
operation
(N-8600MS only)
Selected zone
broadcast
Dial [Paging] [zone or zone pattern selection]···[zone or zone
pattern selection] [ ] keys.
• Zone selection
Dial [ ] [Transfer] [SX-2000 system ID] [zone No.].
• Zone pattern selection
Dial [ ] [Transfer] [SX-2000 system ID] [Function] [zone
pattern No.].
SX-2000 system ID
No.: 01 − 08
Zone No.: 001 − 256
Zone pattern No.: 001
− 216
General broadcast
activation
Dial [Function] [ ] [Transfer] [SX-2000 system ID]
[Function] [1] [Function] [control input (for general broadcast
pattern activation) pattern No.] [ ] keys.
Control input pattern
No.: 001 − 162
General broadcast
termination
Dial [Function] [ ] [Transfer] [SX-2000 system ID]
[Function] [2] [Function] [control input (for general broadcast
pattern activation) pattern No.] [ ] keys.
BGM broadcast
change
Dial [Function] [ ] [Transfer] [SX-2000 system ID]
[Function] [5] [Function] [control input (for BGM change) No.]
[ ] keys.
BGM broadcast end Dial [Function] [ ] [Transfer] [SX-2000 system ID]
[Function] [5] [Function] [control input (for BGM change) No.]
[ ] keys.
Equipment No.: 1 − 5
Equipment ID
No.: 00 − 32
Control input
No.: 01 − 32
Control output
No.: 01 − 32
Control output pattern
No.: 001 − 162
Control output
activation
Dial [Function] [control output or control output pattern
selection]···[control output or control output pattern selection]
[ ] keys.
• Control output pattern selection
Dial [ ] [Transfer] [SX-2000 system ID] [Function] [3]
[Function] [control output pattern No.] keys.
Control output
deactivation
Dial [Function] [control output or control output pattern
selection]···[control output or control output pattern selection]
[ ] keys.
• Control output pattern selection
Dial [ ] [Transfer] [SX-2000 system ID] [Function] [4]
[Function] [control output pattern No.] keys.
Multi-operation
activation (Selected
zone broadcast and
control output pattern
activation)
Dial [Paging] [zone or zone pattern selection]···[zone or zone
pattern selection] [control output pattern selection]···[control
output pattern selection] [ ] keys.
• Zone selection
Dial [ ] [Transfer] [SX-2000 system ID] [zone No.].
• Zone pattern selection
Dial [ ] [Transfer] [SX-2000 system ID] [Function] [zone
pattern No.].
• Control output pattern selection
Dial [ ] [Transfer] [SX-2000 system ID] [Function] [3]
[Function] [control output pattern No.] keys.