P. 3-80 – Toa N-8000 Series User Manual

Page 384

Advertising
background image

3-80

Chapter 3

INSTALLATION & WIRING

To an indicator or other

external equipment

To an electronic lock or

other external equipment
To a switch, sensor, or

other external equipment

To external speakers

(8 Ω, 0.6 W or more)

1

2

3

External power

supply

Contact

output (blue)

Contact

output (blue)

DC24 V
GND

+

-

N-8640DS/8650DS rear

Contact output 1 (brown)

[External connection cables]

[Connection example]

Speaker cable (black)

Contact input COM (white)
Speaker cable (black)

Contact output (blue)

Contact output COM (purple)

Contact output 4 (yellow)

Contact output 3 (orange)

Contact output 2 (red)

Contact input HOT (gray)

Contact output (blue)

Note: This figure represents the N-8640DS.

Frame ground

(N-8640DS only)

Be sure to ground the N-8640DS's

frame ground terminal. Also ground

the electrical box if used.

When an electrical box is used in

conjunction with the N-8650DS, be

sure to ground the electrical box.

Notes

Diode

Relay

To network

To AC mains

LAN coupler

(supplied with the

N-8640DS/8650DS)

13.12.6. N-8640DS/8650DS connection

1. AC adapter terminal connection

Connect the AC adapter*.
* Use the AC adapter AD-1210P/1215P (optional) or

the equivalent.

As for the usable adapter, consult your TOA

dealer.

2. external connection cables

[Contact output specifications]

Open collector output

Withstand voltage: 30 V DC

Max. control current: 50 mA
[Contact output (blue x 2) specifications]

Relay contact output

Withstand voltage: 30 V DC

Max. control current: 500 mA
[Contact output (gray, white) specifications]

No-voltage closed contact input.

Open voltage:

5 V DC

Short-circuit current: 10 mA or less

3. Network connection terminal connection

Can be connected to a network of 10BASE-

T/100BASE-TX in auto-sensing.

Connecting the station to a PoE (Power over

Ethernet) switching hub compliant with IEEE802.3af

eliminates the need for an AC adapter. (For

connection, refer to the instruction manual supplied

with the switching hub.)

Use a straight through cable of UTP category 5 or

more for this connection.

Advertising