Toa N-8000 Series - Manual (Page 596)

7-7
Chapter 7 MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS/8600MS only)
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
3 : L o g f i l e
0 : M a i n t e n a n c e
P a s s w o r d
1 : N e t w o r k s e t
2 : L i n e A t t r i b u t e
1 2 3 4
[Example]
7. SySTEM SETTINgS
Only a portion of system setting items can be set at the Multifunctional Station.
7.1. Entering Maintenance Screen
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the up or down arrow keys or the [0] key to move
the cursor to "0: Maintenance."
Step 3. Press the Select key to display the password entry
screen.
Step 4. Enter 4-digit-password by pressing dial keys, then
press the Select key.
The default factory setting is 0000. It can be changed
using the N-8000 Setting Software. (Refer to p. 5-27 .)
After password has been entered correctly, system
setting screen is displayed.