Toa N-8000 Series - Manual (Page 195)

2-84
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
Call
forwarding
Absence
transfer
Group
hunting
Time-based
call forwarding
Remote
response
Executive priority
Scan monitor
Paging
Paging Response
Station speaker
output settings
Programming
at your station
Erasure at your station
Programming
at your station
Erasure at your station
Programming
at your station
Erasure at your station
Programming
Erasure
Response
New programming
Member addition
Erasure
Member erasure
Start
Stop/Restart
Advancing Scan
Reverse Scan
Voice transmission
End
Zone paging
Selectable paging
Selectable paging to
zones and zone
pattern-set zones
All-call paging
Emergency paging
Automatic Response
Zone number dialing
Increase volume
Decrease volume
Dial [Function] [4] [1] [ ] [the C/O line interface access
number] [ ] keys.
Dial [Function] [4] [1] [your station No.] [ ] keys.
Dial [Function] [4] [4] [ ] [the C/O line interface access
number] [ ] keys.
Dial [Function] [4] [4] [your station No.] [ ] keys.
Dial [Function] [4] [5] [ ] [the C/O line interface access
number] [ ] keys.
Dial [Function] [4] [5] [your station No.] [ ] keys.
Dial [Function] [4] [3] [ ] [the C/O line interface access
number] [ ] keys.
Dial [Function] [4] [3] [your station No.] [ ] keys.
When call is received to the station assigned to the same
group, press the [PTT] key.
Dial [Function] [7] [0] [ ] keys.
Dial [Function] [7] [1] [member station No.] [ ] keys.
Dial [Function] [7] [2] [ ] keys.
Dial [Function] [7] [2] [member station No.] [ ] keys.
If a called station is busy, press the [9] key.
Dial [ ] [2] [Monitor group No.] [Monitor group No.] ···
[ ] keys.
or
Dial [ ] [2] [ ] [Monitored station No.] [ ]
[Monitored station No.] ··· [ ] keys.
Press [0] to stop. Press [0] again to restart.
Press [ ] key to advance the scan by one station.
Press [ ] key to move the scan back one station.
Press [PTT] to establish conversation.
Either press the [C] key or replace the handset.
Dial [Paging] [Zone No.] keys.
Dial [Paging] [ ] [Zone No.] [ ] [Zone No.] [ ]
··· [Zone No.] [ ] keys.
Dial [Paging] [zone or zone pattern selection]···[zone or
zone pattern selection] [ ] keys.
• Zone selection: Dial [ ] [zone No.].
• Zone pattern selection: Dial [ ] [Function]
[paging zone pattern No.].
Dial [Paging] [0] keys.
Press [ ] [ ] [ ] [ ] keys.
Press [Paging Response] key.
Dial [Paging Response] [Zone No.] keys.
Press [ ] key during a conversation.
Press [ ] key during a conversation.
Station No: 2 – 6 digits
Stations currently set
for other Remote
Response groups can
not establish a different
Remote Response group.
Stations currently set for
other Remote Response
groups cannot join a
different Remote
Response group as a
member station.
Stations currently set for
other Remote Response
groups cannot erase
from a member station
of the Remote Response
group.
Monitor group No.:
1 – 4
Monitored station No.:
2 – 6 digits
Dial during monitoring
Zone No.: 1 – 3 digits
N-8600 only
Zone No.: 1 – 3 digits
Paging zone pattern
No.: 001 – 216
Zone No.: 1 – 3 digits
Function Item Operation Remarks
C/O line automatic
call transfer