Fluke Biomedical medTester 5000C - Manual (Page 115)

8-1
Chapter 8
Memory
This chapter acquaints you with the medTester 5000C memory module
options you may have installed on your medTester.
Introduction
The medTester 5000C offers you two memory module options that you can
use to store test records—100 Record (3) and Expanded Memory(4). If you’re
unsure if your medTester has a memory module installed, do this:
1. From the main menu, MENU1 , press the right arrow to access
MENU2.
2. Enter the menu command:
MEMORY
F1
If the module is not installed, this message appears on the display:
In addition, to store checklists your medTester needs to have the medCheck
module. Test records are gathered from autosequences and checklists, and are
stored and numbered sequentially. In order to print records, you need the
RS-232/Printer Port Module. Once you have conducted an autosequence or
checklist and stored records, you can take advantage of the
medTester 5000C’s memory features.
MODULE NOT INSTALLED