Fluke Biomedical medTester 5000C - Manual (Page 213)

Biomedical Test System
ESU Module
14
14-3
Note
Refer to your ESU analyzer operators manual for additional
information regarding operation and range of available features.
To discover if you have the ESU module installed on your medTester 5000C,
enter these menu commands:
AUTO
F1
ESU
F4
If ESU autosequences are installed, you see this message displayed:
The autosequence names appear below the message. To begin working with
these autosequences, look at the table of ESU autosequence names.
If the ESU module has not been installed, this message appears on the
display:
If the module was installed and you get this message, it may be necessary to
re-enable the module. Refer to the “Enabling Modules” section of Chapter 2
– Installation.
SELECT ESU AUTOSEQUENCE TO RUN
MODULE NOT INSTALLED