Fluke Biomedical medTester 5000C - Manual (Page 188)

medTester 5000C
Operators Manual
12-10
Uploading
Here is the file upload process:
1. The medTester receives an uploading command from the
computer in the form of a MUPUP, SDFUP, or
AUTOSEQUP.
2. medTester sends the expected line count to the computer.
3. medTester receives the verified expected line count from the
computer.
4. If the line count numbers are the same, medTester sends the
file. If the line count number is not the same, medTester
sends the error message:
ERR=24,LINE COUNT WRONG