Customizing nibp autosequences – Fluke Biomedical medTester 5000C User Manual
Page 286
medTester 5000C
Operators Manual
17-12
Customizing NIBP Autosequences
(For detailed information about customizing autosequences, please refer to
Chapter 6, Customize Your medTester 5000C.)
To begin customizing NIBP autosequences, you can view any of your current
ones by entering these menu commands:
1.
From the main menu,
MENU1
, press the right arrow to access
MENU2.
2.
Press the menu commands:
AUTOSEQ
F1
CUSTOM
F3
3.
Press the right arrow, and then press:
NIBP
F2
4.
From the
NIBP
menu, select:
VIEW
F2
5.
Now select the autosequence you want to view.
6.
Finally scroll through the steps in the sequence by using your up
and down arrow keys.
Make Your Own Autosequence
You can customize the 5 preprogrammed pacer autosequences or create 5
new ones with the
blank
sequences. This section describes the menu steps that
you use to customize, or create, autosequences. Note that each customized
autosequence can include as many as 10 NIBP tests. After you enter the
NIBP test values you want, the medTester prompts you for more NIBP test
steps, if desired. If you do not want further NIBP test steps in your
autosequence, you can press
END
.
Note
You can find detailed information about customizing
autosequences in Chapter 6, Customize Your medTester 5000C.