Fluke Biomedical medTester 5000C - Manual (Page 202)

medTester 5000C
Operators Manual
13-6
FROM: Wedge Port (9-pin connection) TO: medTester 5000C (25-pin
connection)
MEDT COM1 COM1
MEDT COM2 COM2
Note
The COM1 cable is only needed if you want to use the Wedge
keyboard interface. This cable routes the keyboard signal from
the Wedge to the medTester. If you are not using the Wedge
keyboard, the COM1 cable is not required. In that case, you can
use COM1 as your regular serial port.
Figure 13-1. Wedge Installation