Yaskawa VS-626 MC5 - Manual (Page 26)

Handling Inverters
2.1.1 Nameplate Information
- 2
2.1 Confirmations upon Delivery
CAUTION
D Never install an Inverter that is damaged or missing components.
Doing so can result in injury.
Check the following items as soon as the Inverter is delivered.
Table
2.1 Checks
Item Method
Has the correct model of Inverter been
delivered? Check the model number on the nameplate on the side of the Inverter (See
2.1.1).
Is the Inverter damaged in any way? Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Are any screws or other components
loose? Use a screwdriver or other tools to check for tightness.
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or
your Yaskawa representative immediately.
2.1.1 Nameplate Information
J Example Nameplate
Standard domestic (Japan) Inverter: 3-phase, 200 VAC, 0.4 kW, IEC IP20 and NEMA 1 standards
Serial number
Model number
LOT NO : MASS : 3.0kg
YASKAWA ELECTRIC CORPORATION
INPUT : AC 3P H 200-220 V 50Hz
200-230 V 60Hz
MODEL : CIMR-MC5A20P 4 SPEC : 20P41F
OUTPUT : AC 3 PH 0-230 V 1.2kVA 3.2 A
SER NO :
JAPAN
Input specifications
Lot number
Inverter specifications
Output specifications
Mass
J Inverter Model Numbers
No. Voltage Class
2 AC input, 3-phase, 200 V
4 AC input, 3-phase, 400 V
No. Specification
A Standard domestic model
CIMR - MC5 A 2 0P4
Inverter
VS-626MC5
No. Max. Motor Capacity
0 P4 0.4 kW
0 P7
to
0 75
0.75 kW
to
7 5 kW
“P” indicates the decimal point.
2