Yaskawa VS-626 MC5 - Manual (Page 288)

12.5 User Constants
- 19
Table 12.1 User Constants (Continued)
No.
Name
(Display)
Factory
Setting
Setting No.
Name
(Display)
Factory
Setting
Setting
P1--01 Winding Change frequency
(Changeover Freq)
0.0 P3--05 Positioning Completion Detection Width
(ORE Set Pulse) 5
pulses
P1--02 Winding change hysteresis
(Frequency Width) 0.5 P3--06 Positioning Completion Cancel Width
(ORE Reset Pulse) 10
pulses
P1--03 MC Answerback error detection
(Ansback Det Time)
0.20 P3--07 Orientation Speed
(ORT Speed) 400
r/min
P1--04 Motor Constant selection
(Wye Winding Sel) 1 P3--08 Gear Ratio (H)
(Gear Ratio H) 1.0000
P1--05 Programming mode valid/invalid during run
(Program Mode @ RUN) 1 P3--11 Gear Direction
(Gear Direction) 0
P3--01 Main Axis Zero Point
(Position Origin) 0
pulses
P3--12 Dither Level
(Dither Level)
0
P3--02 Position Control Gain (H)
(Position Gain H) 10
12