Yaskawa VS-626 MC5 - Manual (Page 77)

Setting User Constants
4.2.4 Operation Mode
- 14
Func-
tion
Valid Access Levels
Min.
Unit
Output Signal Levels for
Multi-function Analog Out-
puts
Function
Name Con-
stant
No.
Func-
tion Flux
Vector
Open Loop
Vector
Min.
Unit
Output Signal Levels for
Multi-function Analog Out-
puts
Function Digital Operator
Display
Con-
stant
No.
U1-25
DI-16H2 input sta-
tus
Monitors the reference value
from a VS-626MC5-DI16H2
Digital Reference Card.
The value will be displayed in
Can’t be output. A A U1 25
DI-16 Reference
The value will be displayed in
binary or BCD depending on
user constant F3-01.
Can t be output. A A
U1-26
Output voltage ref-
erence (Vq) Monitors the Inverter’s internal
voltage reference value for the
motor’s secondary current con-
10 V: 200 (400) VAC
(0 to
r10 V possible)
0.1 V A A U1 26
Voltage Ref (Vq)
motor’s secondary current con-
trol. (0 to r10 V possible)
0.1 V A A
U1-27
Output voltage ref-
erence (Vd) Monitors the Inverter’s internal
voltage reference value for the
motor’s excitation current con-
10 V: 200 (400) VAC
(0 to
r10 V possible)
0.1 V A A
Status
U1 27
Voltage Ref (Vd)
motor’s excitation current con-
trol. (0 to r10 V possible)
0.1 V A A
Status
Moni-
tor
U1-28
Software No.
(CPU)
Manufacturer’s CPU software
ID number
Can’t be output. 0.1 V A A U1 28
CPU ID
ID number
Can t be output. 0.1 V A A
U1-32
ACR output of q
axis
Monitors current control output
value for motor’s secondary cur- 10 V: 100%
0.1 % A A U1 32
ACR (q) Output
value for motor s secondary cur
rent. 10 V: 100% 0.1 % A A
U1-33
ACR output of d
axis Monitors current control output
value for motor’s excitation cur-
10 V: 100% 0.1 % A A U1 33
ACR (d) Output
value for motor s excitation cur
rent. 10 V: 100% 0.1 % A A
U1-34
OPE fault
constant
Shows the first constant number
where an OPE fault is detected
Can’t be output. A A U1 34
OPE Detected
where an OPE fault is detected. Can t be output. A A
4