Yaskawa VS-626 MC5 - Manual (Page 87)

Setting User Constants
4.2.5 Initialize Mode
- 24
Setting C1-08 (Deceleration Time 4) in A2-01 to Define it as a User Constant
Step Key Sequence Digital Operator Display Remarks
1
MENU
MC5 Main Menu
Operation
2 MC5 Main Menu
Initialize
3 DATA
ENTER
Select Language
English
4 Function A2
User Constants
5
DATA
ENTER
User Param 1
A2--01 = ----------
6 DATA
ENTER
User Param 1
--------------
The first digit blinks.
7
Press twice.
User Param 1
C1--01
8
Press twice.
RESET
User Param 1
C1--01
Writes-in set value 0000.
9
Press 7 times.
User Param 1
C1--08
10 DATA
ENTER Entry Accepted
Writes-in the new setting.
User Param 1
A2--01 = C1--08
After a few seconds, the Operator dis-
play is as shown on the left.
11
ESC
Function A2
User Constants
12
Press twice.
Access Level
Advanced
13 DATA
ENTER
A1 -- 01 = 4
Advanced
14
Press twice.
A1 -- 01 = 1
User Program
The user program access level can be
set only after one or more constants
are set as user constants in A2-01 to
A2-32. If no constants are set, the
user program access level will not be
displayed for A1-01.
15 DATA
ENTER Entry Accepted
Writes-in the new setting.
A1 -- 01 = 4
Advanced
If the DATA/ENTER Key is not
pressed within one minute, the Oper-
ator display will return as shown on
the left. In this case, repeat from step
14.
Access Level
User Program
After a few seconds, the Operator dis-
play is as shown on the left.
16
ESC
MC5 Main Menu
Initialize
The access level has been set to the user program access level.
4
A EXAMPLE "