Yaskawa VS-626 MC5 - Manual (Page 93)

Setting User Constants
4.2.7 Autotuning Mode
- 30
Step Key Sequence Digital Operator Display Remarks
13 Number of Poles
4
14
RESET
DATA
ENTER
DATA
ENTER
Press the keys as in steps 4, 5, 6 of
rated voltage setting.
15 Select Motor 1/2
1
16
RESET
DATA
ENTER
DATA
ENTER
Press the keys as in steps 4, 5, 6 of
rated voltage setting.
Leave the setting at 1 to set the value
for motor 1 (the motor contacts nor-
mally used.)
Select “2” to store the autotuning re-
sults for motor 2.
17 Tuning Ready?
Press RUN Key
18
RUN
Tune Processing
Hz A Autotuning starts and the motor ro-
tates for approx. one minute.
Tune Successful Then the motor stops automatically.
19
MENU
MC5 Main Menu
Operation
Returns to the operation mode display.
If a fault occurs during autotuning, refer to Table NO TAG Troubleshooting Autotuning Faults.
4
IMPORTANT