Applied Motion RS-232 - Manual (Page 111)

111 920-0002 Rev. I
2/2013
Host Command Reference
SVAC3, STAC5
Parameter #1 0 = Returns the temperature as measured by an external,
board-mounted sensor. Overtemp occurs at 85 degrees C.
1 = Returns the temperature as measured by the internal,
on-chip sensor. Overtemp occurs at 100 degrees C.
Examples:
Command Drive sends Notes
IT IT=275 Drive temperature is 27.5 o C
IT0 IT=310 Drive temperature is 31.0 o C
IT1 IT=412 Drive temperature is 41.2 o C