Applied Motion RS-232 - Manual (Page 223)

223 920-0002 Rev. I
2/2013
Host Command Reference
ZC - Regen Resistor Continuous Wattage
Compatibility: BLuAC5 and STAC6 drives only
Sets or requests the regeneration resistor wattage value. BLuAC and STAC drives dynamically calculate the
continuous wattage induced into an external regeneration resistor and must know the continuous wattage rating of
the regen resistor to do this effectively.
Command Details:
Structure ZC{Parameter #1}
Type BUFFERED
Usage READ/WRITE
Non-Volatile Yes
Register Access None
Parameter Details:
Parameter #1 Continuous wattage value of regen resistor
- units Watts
- range 1 - 1000
Examples:
Command Drive sends Notes
ZC250 - External regen resistor with value of 250 continuous watts is
connected to the drive