Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1112)

Brocade Network Advisor SAN + IP User Manual 1059
53-1002949-01
Zoning configuration
26
Renaming a zone alias
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select Alias from the Type list.
5. Right-click the zone alias you want to rename and select Rename.
6. Edit the name and press Enter.
Refer to “Zoning naming conventions” on page 1048 for rules about zone alias names.
7. Click OK or Apply on the Zoning dialog box to save your changes.
Deleting a zone alias
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select Alias from the Type list.
5. Right-click the zone alias you want to delete and select Delete.
6. Click Yes on the confirmation message.
The selected zone alias is deleted from the Alias list.
7. Click OK or Apply on the Zoning dialog box to save your changes.
Duplicating a zone alias
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select Alias from the Type list.
5. Right-click the zone alias you want to duplicate and select Duplicate.
The duplicated zone alias displays in the Alias list (for example, <Zone_Alias>_Copy).
6. Edit the name.
To edit the name, refer to “Renaming a zone alias” on page 1059.
7. Click OK or Apply on the Zoning dialog box to save your changes.