Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 186)

Brocade Network Advisor SAN + IP User Manual 119
53-1002949-01
IP discovery profiles
4
Stopping discovery
To stop discovery for a profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab.
3. Select the discovery profile on which you want to stop discovery in the Discovery Profiles table
and click Stop.
4. Click Close to close the Discover Setup - IP dialog box.
5. Click Yes on the confirmation message.
Viewing discovery status
To view discovery status, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab.
3. Review the status in the Status column of the Discovery Profiles table.
Status updates dynamically for any changes. Options include the following statuses:
• Running — Discovery is in progress for the profile.
• Waiting — Discovery will start for this profile once the current profile discovery completes.
• Scheduled — Discovery will be run for this profile at the scheduled time.
• Idle — Discovery is not running.
• Terminating — Discovery for the profile is either completing or has been terminated.
4. Click Close to close the Discover Setup - IP dialog box.
5. Click Yes on the confirmation message.
Viewing discovery reports
To view a report for a discovery profile, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Profiles tab.
3. Select the discovery profile for which you want to view a report in the Discovery Profiles table
and click Report.
The report displays with the following information.
• Discovery Summary table — Provides discovery statistics.
• Discovery Configuration table — Records the discovery parameters.
• Detail — Provides discovery process details.