Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 400)

Brocade Network Advisor SAN + IP User Manual 335
53-1002949-01
User-defined performance monitors
8
- FCIP

Compression Ratio — The compression ratio for the FCIP tunnel.

Latency — The latency for the FCIP tunnel.

Dropped Packets — The number of dropped packets.

Link Retransmits — The number of retransmitted links.

Timeout Retransmits — The number of retransmits due to timeout.

Fast Retransmits — The number of fast retransmits triggered.

Duplicate Ack Received — The number of duplicate acknowledgements received.

Window Size RTT — The window size round trip time.

TCP Out of Order Segments — The number of segments received out of order.

Slow Start Status — The number of slow starts.
- IP

Errors — The number of errors.

Discards — The number of discarded frames.

Receive EOF — The number of end-of-frames received.

Underflow Errors — The number of underflow errors.

Overflow Errors — The number of overflow errors.

Alignment Errors — The number of alignment errors.

Runtime Errors — The number of run time errors.

Too Long Errors — The number of too long frame errors.
- Wireless

Dropped Events — The number of dropped events.

MAC Errors — The number of MAC errors.

Back Packets Received — The number of bad packets received.

Tx Errors — The number of transmit errors.
• Traffic flows
- SCSI

Read Frame Count (frames) — The SCSI read command frame count as reported in the
last data point received for the flow.

Write Frame Count (frames) — The SCSI write command frame count as reported in
the last data point received for the flow.

Read Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Write Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Read Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Write Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Read Data Rate (Mbps) — The SCSI read frame in megabytes per second rate as
reported by the last data point.

Write Data Rate (Mbps) — The SCSI write frame rate in megabytes per second as
reported by the last data point.