Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2160)

Brocade Network Advisor SAN + IP User Manual 2123
53-1002949-01
Database tables and fields
I
OUTBOUND_L2_ACL_ID L2 Access control List ID of the L2 ACL selected for
outbound. Foreign Key for
L2_ACCESS_CONTROL_LIST table.
int
OUTBOUND_WRITE_TO_DEVICE 1/0 corresponding to Write to device/not write to
device for outbound traffic. smallint
TABLE 255 L2_NEIGHBOR
Field Definition Format Size
L2_NEIGHBOR_ID int
INTERFACE_ID int
RMT_IP_ADDRESS varchar 40
RMT_IF_NAME varchar 256
LAST_SEEN_TIME int
LLDP_REM_CHASSIS_ID_SUBTY
PE smallint
LLDP_REM_CHASSIS_ID bytea
LLDP_REM_PORT_ID_SUBTYPE smallint
LLDP_REM_PORT_ID bytea
LLDP_REM_CHASSIS_ID_VALUE To store the MAC or Network address value in ascii
format varchar 40
LLDP_REM_PORT_ID_VALUE To store the MAC or Network address value in ascii
format varchar 40
TABLE 256 LAG
Field Definition Format Size
ID DB ID of LAG(Port-Channel). int
VIRTUAL_SWITCH_ID FK to owning VIRTUAL_SWITCH int
LAG_ID LAG ID int
IF_INDEX Interface index int
IF_NAME Interface name varchar 256
ENABLED LAG is enabled=1, disabled=0 smallint
LAG_MODE Static or dynamic (1=dynamic, 2=static) smallint
ACTIVE LACP active or passive (1=active, 2=passive) valid if
mode=dynamic smallint
TYPE Trunking type (1=standard, 2=brocade, 3=hybrid) smallint
IF_MODE L2 or L3 mode varchar 8
L2_MODE Type of L2 mode (default=access varchar 32
MAC_ACL_POLICY stores the MAC ACL policy information of the LAG varchar 64
VLAN_LIST Comma separated vlan ID list. text
TABLE 254 L2_ACL_INTERFACE_DEPLOY_MAP (Continued)
Field Definition Format Size