Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1140)

Brocade Network Advisor SAN + IP User Manual 1087
53-1002949-01
Zoning administration
26
6. Set the level of detail for the database areas by selecting one of the following options from the
Tree Level list:
NOTE
This list is only available when you set the Comparison View to Full (Zone Configurations,
Zones, and Aliases).
• All Level — Displays all zone configurations, zones, and aliases.
• Zone Configurations — Displays only zone configurations.
• Zones — Displays only zones.
7. Select the Differences only check box to display only the differences between the selected
databases.
8. Select the Sync Scroll Enable check box to synchronize scrolling between the selected
databases.
9. Click Previous or Next to navigate line-by-line in the Editable Zone DB area.
10. Click Close.
To merge two zone databases, refer to “Merging two zone databases” on page 1068.
Managing zone configuration comparison alerts
You can turn off the automatic zone configuration comparison function if you no longer want to see
two of the alert messages that the comparison can produce. When a zone configuration is
successfully activated, the comparison function can display an alert icon if either of two conditions
exist.
The messages are “The active zone configuration does not exist in the zone database” and “The
active zone configuration does not match <zone configuration> in the zone database.” To turn off
the icons and the messages, complete the following steps.
1. After successfully activating a zone configuration, click the Active Zone Configuration tab in the
Zoning dialog box.
2. Select Turn off the comparison alerts between the active zone configuration and the zone
database check box.
Any existing alert icons and messages are cleared and further comparisons are prevented.