Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2174)

Brocade Network Advisor SAN + IP User Manual 2137
53-1002949-01
Database tables and fields
I
REOPTIMIZE_TIMER The number of seconds from the beginning of one
reoptimization attempt to the beginning of the next
attempt. Valid range is 300-65535 seconds. 0 is also
accepted. int
MPLS_LSP_DB_ID Database ID of the MPLS_RSVP_LSP instance which
these parameters are associated with. int
MPLS_RSVP_LSP_PATH_DB_ID Database ID of the MPLS_RSVP_LSP_PATH instance
which these parameters are associated with. int
TABLE 298 MPLS_RSVP_LSP_PATH
Field Definition Format Size
MPLS_RSVP_LSP_PATH_DB_ID Unique database generated identifier. int
PATH_TYPE The type of path that is active, i.e., a primary path, a
standby path, or a generic secondary path. Possible
values are Other-1, Primary-2, Standby-3 and
Secondary-4. smallint
IS_STANDBY Specifies whether the path is standby or not. Currently
it is unused and value is always 0 (Not standby) num (1,0)
MPLS_LSP_DB_ID Database ID of the MPLS_RSVP_LSP instance. int
MPLS_PATH_DB_ID Database ID of the MPLS_PATH instance. int
TABLE 299 MPLS_RSVP_LSP_TUNNEL_RESOURCE
Field Definition Format Size
MPLS_RSVP_LSP_TUNNEL_
RESOURCE_DB_ID Unique database generated identifier. int
MAX_RATE Specifies the maximum data rate (kilo bits/secs) of
the packet travelling over the LSP. int
MEAN_RATE Specifies the mean data rate (kilo bits/secs) of the
packet travelling over the LSP. int
MAX_BURST The maximum burst size in bytes that the LSP can
send at the maximum rate. int
MPLS_RSVP_LSP_PARAME
TERS_DB_ID Database ID of the MPLS_RSVP_LSP_PARAMETERS
instance. int
TABLE 300 MPLS_SERVICE
Field Definition Format Size
MPLS_SERVICE_DB_ID Unique database generated identifier. int
NAME Specifies the name of the MPLS Service. varchar 255
VCID Virtual Circuit Identifier of the MPLS Service. bigint
MPLS_SERVICE_TYPE The type of the MPLS Service. Local VLL-1, Remote
VLL-2, VLL-3, VPLS-4, Admin Group-8, Path-9, RSVP
LSP-10. smallint
TABLE 297 MPLS_RSVP_LSP_PARAMETERS (Continued)
Field Definition Format Size