Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 270)

204 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Software Configuration
6
Client export port settings
You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Client Export Port to assign a communications port between the client and server in the
Category list.
The Client Export Port pane displays ( Figure 75 ).
FIGURE 75 Options dialog box (Client Export Port pane)
3. Enter the client export port number to set a fixed port number for the client in the Client Export
Port field.
The current port number displays in the Current Port # field.
The default port number (55555) displays in the Default Port # field.
4. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after a client restart.
5. Click OK on the “changes take effect after client restart” message.