Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1260)

Brocade Network Advisor SAN + IP User Manual 1209
53-1002949-01
Element Manager interface overview
31
Element Manager interface overview
The Element Manager interface provides management and monitoring functions to troubleshoot
issues on the Ethernet router series switch running firmware version 5.4 or later.
Element Manager is accessible from the Management application and provides the details of the
switch and its ports.
Accessing the Element Manager interface
To launch the Element Manager interface, choose one of the following options:
• Select Configure > Element Manager > GUI.
• Right-click a Ethernet router device on the Network Objects list or VLAN or the IP or L2 Topology
views and select Element Manager > GUI.
The Element Manager interface displays (
Figure 512 ).
NOTE
You can launch maximum of six Element Managers from the Management application. For more
information, refer to
“Configuring IP device manager preferences” on page 212.
The Element Manager interface consists of the following components:
FIGURE 512 Element Manager - main window
1. Switch properties area - Displays the switch properties. For more information, refer to “Switch
properties” on page 1210.
2. Properties button - Click to launch the Properties dialog box. For more information, refer to
“Viewing IP device and port properties” on page 1976.
3. Address Finder button - Locates where hosts are connected to your network from traffic on the
network. For more information, refer to “Address Finder” on page 395.
4. Element Manager toolbar - Provides quick access to dialog boxes and functions. For more
information, refer to “Element Manager toolbar” on page 1212.
5. Port properties list - Displays the port properties for the selected view (Port, Table, or VLAN).
For more information, refer to “Displaying port properties” on page 1213.