Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 276)

210 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Software Configuration
6
Configuring change manager preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
The IP Preferences pane displays ( Figure 78 ).
FIGURE 78 Options dialog box (IP Preferences pane)
3. Select the ConfigReadFlash check box to obtain configuration back up from flash.
Clear to obtain configuration back up from DRAM. Default is clear (disabled).
4. Enter the number of configurations to retain per product in the ConfigsRetainedPerProduct
field.
Default is 20. Maximum is 30. Minimum is 5. When the system reaches the maximum limit for
a product, the oldest configuration is deleted and the new configuration is saved. However, if a
Baselined configuration becomes the oldest configuration, the baselined configuration is
retained.
5. Select the DoBackupAfterResync check box to turn on product configuration backup after
re-synch is performed from the client.
6. Select the DoBackupOnRunningConfigChangeTrap check box to turn on product configuration
backup after receiving a running configuration change trap.
7. Select the DoBackupOnStartupConfigChangeTrap check box to turn on product configuration
backup after receiving a startup configuration change trap.